PBJIE Solar — Header
one@pbije.com 8613912330560 WhatsApp
f in ▶
Home  /  Products / Q Series

Pbije-Q30-24V/5V

Integrated foldable solar power unit for low-power CCTV and IoT devices — monocrystalline panel, 24AH lithium pack and self-developed hybrid MPPT control in one housing.
Field deployment of the Pbije-Q30-24V/5V
AT A GLANCE

Key Specifications

Panel
30W Monocrystalline Grade A
Battery
24AH / 88.8WH
Output
5V
Rainy Standby
4 days
The Pbije-Q30-24V/5V is a compact all-in-one solar power unit for unattended field devices. The monocrystalline panel folds flat for transport and mounts on a pole or wall in minutes; the built-in hybrid MPPT controller keeps charging conversion efficiency between 95.6% and 99.9%, and the 18650 lithium pack holds the load through up to 4 days of rainy or cloudy weather.
Get a Quote
PRODUCT VIEWS

Front, Back & Side

Engineering drawings of the Pbije-Q30-24V/5V — mounting brackets, controller and cabling.
Front View
Back View
Side View
TECHNICAL SPECIFICATIONS

Full Parameter List

Official specification sheet of the Pbije-Q30-24V/5V.

Appearance Specs

Outer Box Dimensions
390 × 390 × 95MM
Inner Box Dimensions
410 × 310 × 185MM
Weigh
3.5kg

Solar Panel

Solar Panel Power
30W Monocrystalline Grade A
Photovoltaic Conversion Efficiency
23.7%
Solar Panel Lifespan
2% degradation in the first year,average annual degradation of 1% thereafter,theoretical lifespan over 20 years

Battery

Battery Capacity
2AH × 12 cells, total capacity 24AH, total energy 88.8WH
Battery Type
18650 Ternary Lithium-ion battery, 2AH dual-pin digital battery, brand new Grade A product
Cycle Life
70% capacity remaining after 500 full charge/discharge cycles
Rainy/Cloudy Standby
Up to 4 days

Control System & Protection

Max Charging Capability
5A, current limited to 3A
Charging Voltage
9V-15V
Max Discharging Capability
3A, current limited to 2A
Discharging Voltage
5V
Charging Algorithm
Self-developed hybrid MPPT algorithm
Charging Conversion Efficiency
Minimum 95.6%, Maximum 99.9%
Charging Mode
Two-stage charging, full-charge rate charging + trickle charging

Communication

Communication Protocol
Built-in controller chip, supports TTL protocol communication
Q SERIES FAQ

Frequently Asked Questions

Low-power CCTV cameras and IoT sensors that run on 12V or 5V — network bullets, mini domes, data transmitters, RTU terminals and environmental sensors. Match the model to your device’s voltage: the /12V versions output 9–12.6V, the /5V versions output a regulated 5V.
The 24AH / 88.8WH lithium pack supports up to 4 days of rainy or cloudy standby for typical low-power loads. Actual autonomy depends on the connected device’s daily consumption.
Yes. A built-in controller chip supports TTL protocol communication, so the controller can report battery level, charging state and output status to upper-level monitoring equipment.
RELATED MODELS

More in the Q Series

Pbije-Q2-24V/12V

20W Monocrystalline Grade A mono panel · 24AH / 88.8WH lithium pack · 9V-12.6V output · 4-day rainy standby.
View details →

Pbije-Q2-24V/5V

20W Monocrystalline Grade A mono panel · 24AH / 88.8WH lithium pack · 5V2A output · 4-day rainy standby.
View details →

Pbije-Q30-24V/12V

30W Monocrystalline Grade A mono panel · 24AH / 88.8WH lithium pack · 9V-12.6V output · 4-day rainy standby.
View details →

Need This Model in Project Quantity?

Tell us your load profile and installation site — our engineers will confirm the configuration and provide wholesale pricing.
Get a Quote →